Edimax 3G-6408n, User Manual

Page: 68 / 115

66
2.4GHz (G): Allows 802.11g wireless network clients
to connect to this router (maximum transfer rate
54Mbps).
2.4GHz (B+G+N): Allows 802.11b, 802.11g, and
802.11n wireless clients to connect to this router
(recommended).
ESSID This is the name of your router. You can type any
alphanumerical character here (maximum 32
characters).
Channel Number Select a channel from the dropdown menu. You can
select the channel of your preference (1 to 13).
Associated Clients Click Show Active Clients for the list of all
connected wireless clients. Click Refresh in the
new window to renew the list, and click Close to
close the window.
Note: If you have a pop-up blocker installed, you
may have to disable it, or set it to allow the pop-up
window to show up.
Wireless Module Select Enable to turn on the 2.4GHz wireless
signal and select Disable to turn it off.
Click Apply to save the changes, or click Cancel to discard the changes. After you
have clicked Apply , you will see the following message:
Click Apply to save the changes and restart the broadband router. It takes about 60
seconds for the broadband router to restart. Click Continue to configure other settings.