EdilKamin MITO IDRO, Installation, Use And Maintenance Manual

Page: 37 / 352

- 37
-
ENGLISH
GENERAL INFORMATION
ELECTRICAL CHARACTERISTICS
Power supply /- 10% 50 Hz
Average power consumption 120 W
Power consumption during ignition 400 W
Protection on electronic circuit board T2A, 250 Vac, 5x20 Fuse
TECHNICAL DATA FOR SIZING THE FLUE which must, in any case, comply with the guidelines of
this sheet and the installation rules for each product
Nominal power Reduced power
Thermal power output 13 3,9 kW
Temperature of fumes on exit from the discharge pipe 155 67 °C
Minimum draught 0 - 5 Pa
Fume fl ow capacity 10,6 3,6 g/s
THERMO TECHNICAL CHARACTERISTICS
according to EN 14785 (for other values, see DoP on page 40)
Nominal power Reduced power
Thermal power output 13 3,9 kW
Thermal power transferred to the water without fan 10 3 kW
Thermal power transferred to the environment 3 0,9 kW
Yield / Effi ciency 91,6 97,6 %
Emissions CO 13% O
2
0,010 0,025 %
Fume temperature 129 56 °C
Fuel consumption 3 0,8 kg/h
Draught 12 - 5 10 - 3 Pa
Hopper capacity 30 kg
Water content 12 Litres
Maximum operating pressure of the water 1,5 bar
Maximum operating temperature of the water 90 °C
Autonomy 9 34 hours
Heatable volume * 340 m
3
Smoke outlet pipe diameter (male) 80 mm
Air intake pipe diameter (male) 40 mm
Weight including packaging (ceramic/steel) 250 / 230 kg
N.B.
1) keep in mind that external devices can cause interference to the operation of the circuit board.
2) warning: activity on live components, maintenance and/or checks must be carried out by qualifi ed personnel.
(before carrying out any maintenance, disconnect the appliance from the mains electricity)
3) In case of problems with the electrical grid, consult an electrician to evaluate the installation of a sine-wave UPS of at
least 800 Va. Power variations greater than 10% can cause problems for the product.
The above data are indicative and are those resulting during certifi cation on the part of the notifi ed body.
EDILKAMIN s.p.a. reserves the right to change the products at its discretion without notice.
* The heatable room dimensions are calculated on the basis of home insulation in compliance with Italian law 10/91, and subse-
quent changes together with an expected heat output of 33 Kcal/m³ per hour.