31
ENGLISH
USER INSTRUCTIONS
INSTALLER
INITIAL START-UP PHASES
•
• Make sure you have read and understood this
Make sure you have read and understood this
manual.
manual.
•
• Remove all flammable materials from the appliance
Remove all flammable materials from the appliance
(manuals, labels, etc.). In particular remove any
(manuals, labels, etc.). In particular remove any
labels from the glass.
labels from the glass.
•
• Make sure the technician has carried out the initial
Make sure the technician has carried out the initial
start-up of the product and has also filled the pellet
start-up of the product and has also filled the pellet
reservoir for the first time.
reservoir for the first time.
LOADING PELLETS INTO THE TANK
To load the pellets:
Open the pellet loading door and pour the pellets inside.
Be careful not to let any pellets spill.
When the stove is hot, DO NOT PLACE the
bag of pellets on the top.
Use the glove when loading the stove while
it operates and is therefore hot to the touch.
Take care not to touch the fume exhaust
pipe when hot.
FUEL
Use Class A1 wood pellets conforming to the UNI
Use Class A1 wood pellets conforming to the UNI
EN ISO 17225-2 standard or similar local regulations
EN ISO 17225-2 standard or similar local regulations
envisaging, for example, products with the following
envisaging, for example, products with the following
characteristics:
characteristics:
diameter 6 mm
diameter 6 mm
length 3–4 cm
length 3–4 cm
humidity <10%
humidity <10%
For reasons relating to safety and environmental
For reasons relating to safety and environmental
protection, DO NOT burn plastic, painted wood, coal
protection, DO NOT burn plastic, painted wood, coal
or bark fragments in the stove.
or bark fragments in the stove.
Do not use the stove as an incinerator.
Do not use the stove as an incinerator.
Caution
Using fuels other than those specified can
damage the appliance.
EXPANSION
As with all appliances, the stove heats up and cools down during its various operating stages. This implies
normal expansion movements. These expansions may cause slight settling noises that cannot constitute
grounds for complaints.
ODOURS
During the first ignitions, there may be a slight smell of paint, which will disappear within a short time.
The product can only be started up once the claddings have been mounted.
Connect the product to the electricity supply only after having completed its assembly and mounted the
cladding. Otherwise there is a risk of having live electrical parts accessible.
* Check that you have closed the tank. A switch will
stop the pellets from falling in if it has been left open.
*
Summary of Contents for CHERIE 11 EVO
Page 78: ...78 ENGLISH USER INSTALLER ...
Page 79: ...79 ENGLISH USER INSTALLER ...
