16
ENGLISH
STEEL CLADDING
3. position the metal support. Tighten the screws and also insert the nuts and washers above and underneath, only
on one side.
INSTALLER
NOTE. The curving of the side panels may not perfectly coincide with the
curving of the brackets. Therefore, use your hands to make the panel fit
to the bracket before tightening the screws
(V)
. Do not use any tools so
as to avoid the risk of scratching the side panel. Once the position of the
side panel is correct, tighten the screws while keeping the side panel in
position. This will also avoid any interference with the door.
(V)
(V)
(V)
Make sure that the central spacer has been placed
in the “cut” on the metal support.
central spacer
“cut” on the metal support
washer
nut
toothed washer
Summary of Contents for CHERIE 11 EVO
Page 78: ...78 ENGLISH USER INSTALLER ...
Page 79: ...79 ENGLISH USER INSTALLER ...
