29
ENGLISH
MOUNTING THE COVERING
A
MIMI’
F
D
1
3
2
4
B
Step A
Step B
Step D
5
4
3
Step E
Step A
This step shows the stove after having been unpacked
and positioned in the room.
Step B
Remove the lower front panel, using a normal screwdri-
ver as a lever on the upper part, whilst ensuring not to
damage the manual channelling control (if applicable).
Step C
asten the lower front panel to its support found beneath
the door, using the screws and washers D.6 supplied.
Use M6 screws and washers to assemble the upper stone
profile and the cast iron front panel. Unless already in
place, position 4 rubbers in the 4 upper front panel sup-
port holes. Then open the door and fasten the front
panels to the lower part of the structure by applying the
screws supplied.
Step D
- Remove both right and left closure tops from the alu-
minium profiles and remove the 2 M4 screws.
- Insert the stone side into the two grooves in the base,
as shown in the picture.
- Straighten the side, making it as vertical and centred as
possible between the two aluminium profiles.
- Re-insert both tops into the profiles and insert the pro-
file pins. Then fasten the two M4 screws so that they
enter the groove of the stone profiles.
Step E
Unless already inserted, place 5 rubbers into the sheet
metal central top and place the stone top on these.
The picture shows all parts necessary to mount the stone
covering.
e C
Step C
3
2
1
88
32
24
88
22
19
15
104
103
63
63
sk tecnica mimì-norma multilingue vers C 30 11 2010.qxp 30/11/2010 15.27 Pagina 30
