background image

 

14 

Warranty Information 

Hardware Warranty  

For a period of one (1) year after shipment of the Product, Edgewater warrants that such 
Hardware will substantially conform to Edgewater’s published specifications for such Hardware 
on the date of order if properly used in accordance with procedures described in the 
documentation supplied by Edgewater. End-user shall notify Edgewater of any 
nonconformance during the warranty period, obtain a return authorization for the 
nonconforming Hardware from Edgewater, and return the nonconforming Hardware to 
Edgewater’s designated repair facility, freight prepaid, with a statement describing the 
nonconformity. Edgewater’s exclusive obligations with respect to nonconforming Hardware 
shall be, at Edgewater’s option, to advance replace such Hardware, if it is determined to be 
defective, or to refund to End-user the purchase price paid for the Product. Advance 
replacement units are shipped same business day for next-day delivery (within the US) when 
hardware failure is determined by 1pm PST. Failed components must be returned to 
Edgewater within 14 days or End-user will be charged for new product purchase.  

Summary of Contents for 4610W






















Reviews: