EdgeMarc 4610W Network Services Gateway Installation Guide
6
Front Panel
Figure 1: 4610W Front Panel
Name
Description
Off
- Power switch is off (or no power from the AC outlet).
A
Power
Green
- Power is supplied to the unit.
Off
- The unit could not boot up because of self test failure.
Green
- Self test passed.
B
Status
Flashing Green
- Configuration is being written to permanent
storage or an upgrade is in progress.
If pressed twice in quick succession, only the CLI password will be
changed back to it's original password.
If pressed three times in quick succession, the EdgeMarc will
revert back to the factory default settings. This will reset all
passwords and erase all prior configurations. The default LAN
address will be set to 192.168.1.1.
C
Erase Button
Caution
Using the Erase button as outlined above means any
configuration made to the 4610W will be lost. Additionally the
VoIP ALG registration code must be re-entered in the 4610W.
Erasing the configuration means that IP phones installed
behind the 4610W will not work and Internet connectivity or
network access for PCs will be down until the system is
reconfigured.
D
10/100/1000
LAN/PoE Ports
Use Local Area Network (LAN) ports to connect to IP phones or an
Ethernet switch. As a PoE port, these ports can also transfer
electrical power to remote devices. Unit can also be configured
through any of these ports using the web interface.
