EdgeMarc 4610W Network Services Gateway Installation Guide
7
Name
Description
Off
No activity is present, nor is a link established.
Solid Green
Located on the top left corner of the port.
Indicates that the link is active.
E
Link/Activity
Status Indicator
(Green)
Flashing
Green
Located on the top left corner of the port.
Indicates that the link is active and data is being
transmitted or received.
Off
Power is not being delivered to the device.
F
PoE Status
Indicator (Green)
Solid Green
Located in the top right corner of the port.
Indicates that power is being delivered to the
device.
G
USB Ports
2 x USB ports (Not Used)
H
10/100 Ethernet
WAN Port
Can be used as an alternative to the T1/E1 WAN ports. This port
is typically used when connecting the 4600 PoE to an existing
T1/E1 WAN router, cable or xDSL modem.
I
V.90 Dial-In
Console
Used to establish a local console session with the 4610W using a
PSTN connection. The connection is established by calling into the
4610W from a dial-up modem. The web-interface is not available
using this option.
Off
Indicates that the system is not on or the T1
cble is not connected.
Solid Green
Indicates that the T1 link is up and properly
functioning.
Solid Amber
Indicates that the T1 is in an alert condition.
J
T1 Status
Indicator
Solid Red
Indicates that the T1 is not properly functioning.
K
T1/E1 WAN
T1/E1 ports are used to connect to data T1 lines. The device at
the far end of the line is a router or other device expecting TCP/IP
data. Individual DS-0 channels on each T1 are not used to carry
uncompressed voice.
L
Line/Phone
2 FXO ports
6 FXS ports
Off
- No active call
M
Line/Phone
Status Indicator
Green
- Active call
