Edgewater Networks 158CS, Owner Assistance Manual

Page: 13 / 90

11
Water Pressure Gauge
This gauge measures pressure in the engine cooling system. If the pressure changes from the
norm it could indicate a complete or partial blockage in the system or a water pump problem. If
this does not return to normal, your dealer should check it to make sure the cooling system is
operating properly. NOTE: Factory rigged boats are not equipped with water pressure gauges.
Voltmeter
This meter displays the voltage for the battery and charging system.
Hour Meter
The hour meter keeps a record of operating time and is very useful for scheduling maintenance.
Engine Alarms
Most outboards are equipped with several audible engine alarms. Your engine owner’s manual
will familiarize you with these and their sometimes-distinctive sounds.
Warning : If an engine alarm sounds, shut down the engine until the source of the problem is
determined.
Compass
The compass assists in determining your location by indicating your position relative to magnetic
north. For accuracy, your compass may need to be adjusted to take into account specifics of your
boat and geographic location. Please refer to the material provided with your compass for
“compensation”.
Instrument Maintenance
Your instrument faces should be periodically cleaned to keep them free of salt and atmospheric
debris. The ignition switches should be periodically sprayed with a contact cleaner/lubricant to
keep them free of corrosion and dirt.
4/Electrical Systems
4.1 General
Your EdgeWater 158CS operates on a 12 volt DC system, similar to your automobile. The battery
or batteries are typically lead acid type and require similar maintenance to your car’s battery. An
electrical schematic is included in the Appendix for specific location of electrical components.
4.2 Panel Switches
Your EdgeWater 158CS is equipped with panel mounted breakers located on the face of the
helms’ console. The panel includes a switch for navlights and a 12v outlet. A wiring diagram is
included with this manual to assist you in troubleshooting the boats’ electrical system.