Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM User Hardware Manual Download Page 24 | Manualshive

Page: 24 / 102

Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM User Hardware Manual Download Page 24

SECTION 1:

OVERVIEW

1-4

BATS

0018257_REV_A

1.3.4

Transceiver

All units have a Transceiver; however, the configuration determines the Transceiver’s appearance. All
Transceiver’s function identically, regardless of configuration. In the Portable System, it is the Yellow Deck
box, shown in

. In the Desktop System, it is the Black Box, shown in

. In the Rackmount

System, it is the Rackmount, shown in

Compatibility with Older TrackPoint Systems

The BATS system is backwards compatible with older features and components, see

for more information and greater detail.

Software

The BATS comes with two software interfaces:

•

TrackMan Software

– provided free of charge with each purchase.

•

IPS Software

– paid, which provides Latitude and Longitude positioning, in addition to relative.

1.5.1

TrackMan Software

The TrackMan software is EdgeTech’s Windows®-based USBL user interface software. TrackMan
communicates with the BATS’ USBL Processor Module to allow modification of the target & system
parameters and outputting of processed USBL data to Navigation software, such as IPS software. For more
information, see the Software Trackman Software Manual, 0019630.

1.5.2

IPS Software

IPS, Integrated Positioning System, is a Windows® based program that interfaces to DGPS and TrackMan
for latitude / longitude positioning. The IPS software integrates USBL data and the DGPS data to display
and output tracked target data relative to Latitude and Longitude. IPS software is compatible with
TrackMan. Please see PN 0019630.

Optional Equipment

The optional equipment specifications for the BATS portable are as follows:

•

Charger

•

MultiBeacon

«
...
22
23
24
25
26
...
»

Summary of Contents for USBL BROADBAND ACOUSTIC TRACKING SYSTEM







































































































Reviews:

No comments