manualshive.com logo in svg

Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM, User Hardware Manual, Page: 10 / 102

Share
Download
Edgetech USBL BROADBAND ACOUSTIC TRACKING SYSTEM User Hardware Manual Download Page 10

 

 

x 

 

 

 

BATS

 

0018257_REV_A

 

International Shipping Return Instructions 

The following steps only apply to material being returned from outside the Continental United States, and 
must be followed carefully to prevent delays and additional costs: 

1.

 

The waybill and all shipment documentation associated with the shipment must clearly state that 
the 

Country of Origin/Manufacturer is USA

. 

2.

 

The waybill and all associated shipment documents must state the following to eliminate 
taxes levied: 

United States goods returned to manufacturer for repair purposes only

. 

3.

 

The waybill and all documents associated with the shipment must state the following for 
description (HS Tariff Code eliminates duty charges): 

Geophysical Scientific Instrumentation; Side 

Scan System, Beacons; HS Tariff Code: 9015.80.80.80

 

4.

 

If using a freight forwarder, ensure they understand that the goods are duty & tax free United 
States goods returned to manufacturer for repair only. Additionally, please instruct the freight 
forwarder that the shipment is FREE DOMICILE and must be delivered to our door. 

5.

 

Please send all shipping documents in advance of the shipment by email to 

[email protected]

. Providing EdgeTech with the shipping documents will enable us to 

follow up with the carrier on our end. 

Also include EdgeTech’s broker information below on the commercial invoice: 

Attn: Brenda Richards - [email protected] | Terri DiOrio - [email protected] 

 

TransGroup BOS INTL, 140 Eastern Ave, Chelsea MA 02150 
Office: 617-889-5089   TF: 877-839-3353 

 Fax: 617-889-5189 

NOTE: 

For International Shipments, If the value of the equipment is over 

$1000, the following Shipper's oath must be sent with the invoice. This 
oath can be typed on the invoice or on a separate letterhead: 

"I, ______________________________, declare that the articles herein specified are the growth, 

produce, or manufacture of the United States; that they were exported from the 

United States from the port of _____________________, on or about _______________; that they 

are returned without having been advanced in value or improved in condition by any 

process of manufacture or any other means; and that no drawback, or allowance has 

been paid or admitted hereof." 
 
Signed ______________________________

 

 

Summary of Contents for USBL BROADBAND ACOUSTIC TRACKING SYSTEM







































































































Reviews:

No comments