SECTION 4:
MAINTENANCE
4-4
3100-P PORTABLE SUB-BOTTOM
0004802_REV_F
4.6.1
Disassembling a Tow Vehicle
NOTE:
Some of the images shown below are of a 216SB vehicle being
disassembled, whilst not the exactly like the 424 vehicle the overall
disassembly procedure is similar.
To disassemble a sub-bottom tow vehicle:
1.
Using the blade of the screw driver, pry out the retaining ring from the locking sleeve as shown in
Figure 4-2: Retaining Ring and Locking Sleeve Removed
2.
Remove the retaining ring and the locking sleeve from the connector as shown in
Figure 4-3: Male Connector
Retaining Ring
Locking Sleeve
Summary of Contents for Model 3100P Sub-bottom Sonar System
