Edgetech Model 3100P Sub-bottom Sonar System, Hardware Manual

Page: 52 / 66

SECTION 4: MAINTENANCE 4-2
3100-P PORTABLE SUB-BOTTOM 0004802_REV_F
4.4 Storage
When not in use, all the components of the 3100-P Sub-Bottom Profiling System should be packed in their
original shipping containers, in the same manner in which they were originally shipped, and stored in a
dry area.
4.5 Restoring the Operating System
An image file of the 80-GB hard drive is provided on a flash drive. This flash drive can be used to completely
restore the hard drive to its original shipped factory configuration in the unlikely event of its failure. For
instructions on how to restore the operating system hard drive, refer to
APPENDIX A: SYSTEM RESTORE .
4.6 Disassembling and Reassembling a Tow Vehicle
The procedures below describe how to disassemble and reassemble a tow vehicle to access the
transducers, hydrophones, transformers, inductors, spider boxes, spider arrays, and preamplifiers. The
tools required are a socket wrench, 7/16 and 1/2-inch sockets, and a small flat screw driver.
CAUTION!
Disassembling a tow vehicle may void its warranty. If in doubt, contact
E
DGE
T
ECH
C
USTOMER
S
ERVICE
for more information.