Edgetech 3200-XS, User Manual

Page: 39 / 74

Deck Unit Connections
3-7
3.6 Deck Unit Connections
Most of the connections to the Deck Unit are made using connectors on the back. These
connectors are shown in Figure 3-1 on page 3-4. The trackball and keyboard connections
are made using connectors on the front of the Deck Unit. They are shown in Figure 3-2 on
page 3-5.
The Deck Unit connections are the following:
TRACKBALL: PS2 connector. Connects to the trackball.
KEYBOARD: PS2 connector. Connects to the keyboard.
SEA CABLE: 11-Pin female bulkhead connector. Connects to
the tow cable.
MONITOR: DB-15 female connector. Connects to the LDC
monitor.
COM 1-NAV: DB-9 female connector. RS-232 serial port that
connects to the navigation system.
COM3: DB-9 female connector. RS-232 serial port that
can be used to connect to the navigation
system.
PARALLEL: DB-25 female connector. Connects to an
optional printer.
TRIGGER IN: BNC connector. Connects to an external trigger
source to trigger the sonar.
TRIGGER OUT: BNC connector. Connects to an external sonar
system to trigger it.
ETHERNET: RJ-45 connector. Available for connection to a
local area network (LAN).
USB: (3) USB connectors. Two on the rear panel and
one on the front panel.
AC POWER: CEE-type AC input and output connectors. The
AC input connector connects to the AC power
source, and the AC output connectors are
available for powering the LCD monitor and
other equipment if required.