Edgetech 2000-TVD, User Hardware Manual

Page: 57 / 111

3-9
3.6 TCP/IP Address Settings
The 2000 Series Combined Side Scan Sonar and Sub-Bottom Profiling System includes several Ethernet
devices connected on a common local area network (LAN), and each of these devices has a factory set
TCP/IP address which under normal circumstances does not require changing. However, should any of
these devices be replaced, or if upgrades are later installed, it may be required that the TCP/IP addresses
be reconfigured. In addition, any computer that is to be connected to the STARMUX III must have its IP
address set to 192.9.0.nnn, where nnn is any integer from 1 to 100—except for the following reserved
addresses:
• 192.9.0.22
• 192.9.0.23
• 192.9.0.101
• 192.9.0.102
The factory IP address setting of the Topside Computer Ethernet connection is 192.9.0.99. For a list of the
STARMUX III Ethernet devices and their TCP/IP addresses, refer to
T
ABLE
3-2 , and for the towfish, to T
ABLE
3-3 .
DEVICE TCP/IP ADDRESS
ASDL Modem Board 192.9.0.22
Table 3-2: STARMUX III Devices TCP/IP Addresses
DEVICE TCP/IP ADDRESS
CPU Board 192.9.0.101
ASDL Modem Board 192.9.0.23
Table 3-3: Towfish Ethernet Devices IP Addresses
3.7 Connecting the System Components
Most of the system components, including some optional components, such as a printer and a navigation
system, connect to the Topside Computer. The towfish and any optional external sonar systems connect
to the STARMUX III Digital Telemetry Link.
WARNING! Do not connect the tow cable to the STARMUX III Digital
Telemetry Link before connecting it to the towfish, otherwise injury or
death can occur if the exposed connector on the tow cable is energized.
Always connect the tow cable to the towfish first.