Edgetech 2000-TVD, User Hardware Manual

Page: 27 / 111

1-9
1.4.6 Additional Processing Gain
In addition to the resolution improvement, correlation processing achieves a signal processing gain over
the background noise by using a broad bandwidth transmission pulse that sweeps out over a range of
frequencies instead of trying to operate with one very sharp acoustic peak pulse as is done with CW side
scan and sub-bottom sonar systems. This technique generates a lot of acoustic energy in the water that
results in a processing gain that is approximately ten times the log of the time bandwidth product. This
improvement is due to the signal having a time duration longer than the inverse of the bandwidth, thus
increasing the signal energy without increasing the power of the outgoing pulse. To equal the typical
performance of the full spectrum sonar pulse, conventional pulse side scan and sub-bottom sonars would
have to operate at a peak pulse power of 100 times greater than a full spectrum pulse.
1.4.7 Gaussian Shaped Amplitude Spectrum Outgoing Pulse
Another important feature of Full Spectrum Chirp technology is that the signal processing optimizes the
performance of the side scan and sub-bottom sonars. The sonars contain many components, each with a
unique dynamic range and linearity characteristic which are frequency dependent. In addition to this
characteristic, the amplitude spectrum of the outgoing pulse is chosen to be approximately Gaussian in
shape to limit the side lobe level and temporal resolution losses due to attenuation. As a wavelet with a
Gaussian shaped spectrum is attenuated by the sediment, energy is lost but its bandwidth is nearly
preserved. Therefore, even after being attenuated, the acoustic pulse has approximately the same
resolution as the outgoing pulse.