DiskGO! Watch as boot device for every computer.
¾
Award has changed its BIOS in March 2002. The boot up procedure has been changed. The boot up
utility will not work with Award’s new BIOS if you are using the USB ZIP boot up option.
Recovery Disk
If your DiskGO! Watch becomes damaged, you can use this utility to repair the functionality of the device.
It will put the device back to its original, out of the box state. If there are some bad blocks in the flash
memory, its size may decrease after you run this utility.
1).
After you click on the [RecoverDisk] in “Utility” tab of the UMSD manager, the following window
will pop up:
Warning The “Recover Disk” action will erase all the data stored in the DiskGO! Watch. You cannot stop
this process once you begin. It is important that you backup any important files or data
before you use the “Recover Disk” function. Please close any open programs or windows as
well.
2).
You can enable the “Scan Disk” option for “Read/Write” testing on each block. It will take
about 1.5 minutes for each 16 MB of space on your DiskGO! Watch.
3).
After you click “OK”, the low level format process will start.
