EDGE30 / EDGE2440 / EDGE40 / EDGE2460 / EDGE60 / EDGE3860
Installation and Operating Manual
Original Instruction Manual
4
Rev 2.1 July 12, 2016
OVEN START-UP AND SHUTDOWN
WARNING
This appliance is equipped with a three-prong (grounding) plug and
must be connected to a properly grounded three-prong receptacle.
This is to protect you from a possible shock hazard.
DO NOT
remove the grounding prong from this plug, or use any form
of adapter to plug the appliance into a standard two-prong receptacle.
OVEN START-UP
1. Turn on the OVEN FAN switch.
2. Set the TEMPERATURE CONTROL to the desired baking temperature.
3. Turn on the BURNER switch.
4. If the burner does not light within a few seconds, turn off the BURNER switch,
wait five minutes, and then return the BURNER switch to on.
5. Turn on the OVEN CONVEYOR.
6. Set the CONVEYOR SPEED control to the desired baking time.
7. Preheat the oven for 15 minutes before baking any product.
OVEN SHUTDOWN
1. Turn off the CONVEYOR switch.
2. Turn off the BURNER switch.
3. Turn off the OVEN FAN switch.
NOTE
In case of a power failure or interruption, turn all oven control switches to off and
remove all product from the oven. When power is restored, follow the instructions
above to re-start the oven.
NOTE
Oven is equipped with a cool down circuit. Oven fan will continue to operate until oven
temperature reaches 225
˚
F.
