Edge Products Juice Attitude, Installation Instructions Manual, Page: 9 / 24

7. Route the CMP harness
across the top of the engine,
and down towards the bottom
of the engine as shown. It is
best to route along side the
factory wiring harness)
NOTE: The CMP sensor is located
on the front of the engine. Look-
ing “up” from underneath the
truck, it will be above and towards
the passenger side of the main
pulley.
8. Once the CMP sensor is
located, and the Edge harness
plugged in, use zip ties to keep
all parts of the harness away
from the belt or other moving
parts.
NOTE: Fasten the Edge harness
to the existing truck harness. The
metal support for the plastic cover
is a convenient place to secure the
harness using a wire tie.
CMP ASSEMBLY
(LOOKING “UP” FROM
UNDERNEATH THE TRUCK)
9. Next, locate the TPS Sen-
sor harness that is specific to
your truck. (included in box)
10. Locate the truck’s Throttle
Position Sensor (TPS) ac-
cording to the pictures on the
following page:
Metal
Support
Edge CMP
Harness
Engine
Harness
CMP
Sensor
Serpentine Belt
Coolant Reservoir
CMP Sensor
Routed Edge Harness