Edge Products Juice Attitude, Installation Instructions Manual, Page: 12 / 24

Installing the Juice Harness
Harness Connection Guide
Main Edge PCM Connectors
EGT
Connections
Manifold Absolute Pressure
(MAP) Sensor Connectors
Attitude
Connection
Main Juice
Connector
WARNING An electrical
charge or battery acid can burn
you. Battery gas can explode or
ignite. Take care when working
around the battery. Follow instruc-
tions in the vehicle owner’s man-
ual for disconnecting and recon-
necting a battery.
CAUTION: It is strongly
recommended that both
batteries be disconnected.
1. Remove the battery cables
(negative first) using an 8 mm
wrench.
2. Remove the driver side bat-
tery cover by releasing the tab
located on the left side.
3. Completely remove the
driver side battery and set
aside. (This will allow you to
easily connect the Main PCM
connectors into to the PCM.)
4. Locate the PCM. It is
shown below.
CAUTION: For connector removal,
follow the instructions in step 3 to
avoid damaging your engine har-
ness or PCM connectors.
Removed
Battery
Location
Removed
Center
Location
PCM