Edge Ovens EDGE40, Installation & Operating Manual

Page: 40 / 48

EDGE40 / EDGE60 Installation and Operating Manual
36 Rev 1.1 December 04, 2008
MAINTENANCE
Turn off the oven, disconnect the gas supply line, and unplug the electrical cord
(or lock out the electrical supply) before doing any cleaning or service work on
the oven.
WARNING
To prevent personal injury from moving parts or electrical shock, do not try to
clean or disassemble any part of the oven with power applied and until the oven
is completely cooled down.
IMPORTANT
•
Turn off the oven.
Before performing oven maintenance:
•
Allow the oven to complete its cool down cycle.
•
Turn off the electrical supply to the oven or unplug the power cord from the
receptacle.
•
If the oven must be moved, close the gas supply shutoff valve, disconnect the
gas supply line at the oven, and unlock the casters so the oven can be moved
safely.
•
Return the oven to its original location and lock the casters.
After performing oven maintenance:
•
If the restraint cable was disconnected to move the oven, reconnect it now.
•
Reconnect the gas supply line and open the gas supply shutoff valve. Test
the gas supply connections for leaks.
•
Reconnect the electrical supply or plug the power cord into its receptacle.
•
The oven is now ready for normal startup and use.
CAUTION
•
Never use a water hose, pressure washer, or steam cleaner on ovens.
•
Never use metal scrapers, razor blades, steel wool, scouring pads, or any
other ferrous abrasives when cleaning ovens.