Edge Ovens EDGE40, Installation & Operating Manual

Page: 23 / 48

EDGE40 / EDGE60 Installation and Operating Manual
19 Rev 1.1 December 04, 2008
1. All EDGE ovens have four (4) end plug assemblies. Each oven contains two (2) top
and two (2) bottom end plugs. The top end plugs can be identified by the baffle
mounting holes located on either end.
Installation Instructions – End Plugs (Options #1 and #2)
2. Install the bottom end plugs first by fitting them into the openings in the sides of the
bake chamber. The non-insulated part of the baffle is oriented downward on the
bottom end plugs. Tighten the thumbscrews by hand (do not use pliers to
tighten).(Figure 17)
Figure 17
3. Install the top end plugs as in step 2 above except the non-insulated part of the
baffle is oriented upward . Tighten the thumbscrews by hand only (do not use pliers
to tighten).(Figure 18)
Figure 18