Edge Ovens EDGE40, Installation & Operating Manual

Page: 18 / 48

EDGE40 / EDGE60 Installation and Operating Manual
14 Rev 1.1 December 04, 2008
13. Firmly tighten all bolts passing through the oven top.
14. Reinstall the insulation in the oven top.
Do not place your hands or fingers under the connecting lip. The edge of the
connecting lip is sharp and can cause severe cuts or perhaps loss of a finger.
WARNING
15. Lift and set the oven assembly on the oven base. Ensure that the connecting lip fits
over the oven base.(Figure 10)
Figure 10
16. Lift the control can into position, and run the two thermocouple leads into the hot air
plenum through the small hole provided.(Figure 11)
Figure 11