Edge-Core ES4612, Management Manual, Page: 438 / 666

Command Line Interface
4-124
4
snmp-server user
This command adds a user to an SNMP group, restricting the user to a specific
SNMP Read and a Write View. Use the
no form to remove a user from an SNMP
group.
Syntax
snmp-server user username groupname { v1 | v2c | v3 [ encrypted ]
[ auth { md5 | sha } auth-password [ priv des56 priv-password ]]
no snmp-server user username
• username - Name of user connecting to the SNMP agent.
• groupname - Name of an SNMP group to which the user is assigned.
• v1 | v2c | v3 - Use SNMP version 1, 2c or 3.
• encrypted - Accepts the password as encrypted input.
• auth - Uses SNMPv3 with authentication.
• md5 | sha - Uses MD5 or SHA authentication.
• auth-password - Authentication password. Enter as plain text if the
encrypted option is not used. Otherwise, enter an encrypted password.
(A minimum of eight characters is required.)
• priv des56 - Uses SNMPv3 with privacy with DES56 encryption.
• priv-password - Privacy password. Enter as plain text if the encrypted
option is not used. Otherwise, enter an encrypted password.
Default Setting
None
Command Mode
Global Configuration
Command Usage
• The SNMP engine ID is used to compute the authentication/privacy digests
from the password. You should therefore configure the engine ID with the
snmp-server engine-id command before using this configuration command.
• SNMP passwords are localized using the authoritative SNMP engine ID.
Table 4-41 show snmp group - display description
Field Description
groupname Name of an SNMP group.
security model The SNMP version.
readview The associated read view.
writeview The associated write view.
notifyview The associated notify view.
storage-type The storage type for this entry.
Row Status The row status of this entry.