manualshive.com logo in svg

Edge-Core ES4612, Management Manual, Page: 251 / 666

Share
Download
Edge-Core ES4612 Management Manual Download Page 251

IP Routing

3-203

3

CLI -

 This example shows all entries in the ARP cache.

Displaying Local ARP Entries

The ARP cache also contains entries for local interfaces, including subnet, host, and 
broadcast addresses.

Command Attributes

•

IP Address

 – IP address of a local entry in the cache. 

•

MAC Address

 – MAC address mapped to the corresponding IP address.

•

Interface

 – VLAN interface associated with the address entry.

•

Entry Count

 – The number of local entries in the ARP cache.

Web -

 Click IP, ARP, Other Addresses.

Figure 3-119   ARP Other Addresses

Console#show arp

4-242

Arp cache timeout: 1200 (seconds)

    IP Address       MAC Address      Type   Interface
--------------- ----------------- --------- -----------
       10.1.0.0 ff-ff-ff-ff-ff-ff     other           1
      10.1.0.11 00-11-22-33-44-55    static           1
      10.1.0.12 01-02-03-04-05-06    static           1
      10.1.0.19 00-10-b5-62-03-74   dynamic           1
     10.1.0.253 00-00-ab-cd-00-00     other           1
     10.1.0.255 ff-ff-ff-ff-ff-ff     other           1

Total entry : 6
Console#clear arp-cache

4-242

This operation will delete all the dynamic entries in ARP Cache.
Are you sure to continue this operation (y/n)?y
Console#

Summary of Contents for ES4612



























































































































































































































































































































































































































































































































































































































































































Reviews:

No comments