Manual
7-8) Activate the PROGRAMA key again and a new screen TELA-4 will be shown, and the
cursor will be flashing over the pre burn field PRÉQ=00:00, keep the values at ZERO and
confirm it using the OK key. Next, the cursor will be flashing over the pressing field
PREN=00:00, type the new value PREN=09:00 and confirm the operation using the OK
key. Now the cursor will flash over the argon field ARGON, keep it deactivated
ARGON=NÃO and confirm the operation using the OK key. To program the quick cooling
field, activate the left arrow to fill the field RESF=SIM, confirm the operation using the OK
key. The cursor will flash over the autostart field, keep it deactivated and confirm the
operation using the OK key AUTOS=NÃO. When these fields are filled, the selected
function will be activated and the parameters will be part pf the recipe. EX-16
7-9) Activate the PROGRAMA key again, and a new key TELA-5 will be shown in which
the cursor will be flashing over the “D” field for the SOBE function. Take the cursor to the
position (5) using the left and right keys and confirm the operation using the OK key. The
confirmation of this option will be shown in parentheses on the SOBE field. Repeat the
previous step to program the elevator function DESCE, move the cursor to the position (D)
and e confirm the operation using the OK key. EX-17.
7-10) Activate the PROGRAMA key again, the system will return to TELA-1 showing the
programming beginning. At this point the recipe is ready to be saved GRAVADA in the
memory, check the step-by-step for saving recipes PG-18-item-9. To send the recipe to
the base just activate the MONITORAÇÃO screen.
14
Summary of Contents for press2 alumini
Page 1: ...Manual ...
