35
Pro-Flo EFI Installation Instructions
©2008 Edelbrock Corporation
Brochure No. 63-3527
Catalog #3527, #3528
Rev. 8/08 - AJ/mc
OPTIONAL PC TUNING FEATURE
To use the optional PC tuning feature, connect a
DB9 serial extension cable to connector J25 of
the main harness. Connect the other end to
your PC’s serial port as shown. Double click on
the System Editor icon shown below.
The engine controllers included in the Edelbrock Pro Flo system CANNOT be edited live using the System Editor software. In other words, System
Editor can only be used to edit the calibration file loaded in the software. You cannot directly edit the calibration file loaded into the ECU. When
you make changes to a calibration file, it must be saved and flashed into your ECU’s memory before those changes take effect. For additional
information on using System Editor to edit your calibration files, refer to the online help by selecting the Help menu at the top of the screen.
PUMP
J19
o2
J18
3/8"
CAL MODULE
J24
J1
J2
PC COMMS
J25
MAIN ECU CONNECTORS
CAL MODULE ADAPTER
CAL MODULE
DB9 SERIAL CABLE (OPTIONAL, NOT INCLUDED IN KIT)
TO PC SERIAL PORT
USE WITH SYSTEM EDITOR
SOFTWARE FOR OPTIONAL
PC TUNING
MAIN ENGINE HARNESS
HANDHELD CAL MODULE
FOR TUNING WITHOUT PC
