To Remove Carrier
from Base
From the back of the
carrier, pull the base
release handle out and lift
the carrier out of the base.
To Install Canopy
Completely thread the
plastic strip through the
tunnel in front edge of the
canopy.
To Attach Carrier to
Base
Align the notches in the
front of carrier with the
base lock bar.
Push down firmly to lock.
You will hear a “click”
when it is locked.
Pull up on carrier to make
sure it is locked.
Attach Canopy to
Carrier
Fit back of canopy over
back of carrier.
Snap each plastic strip
end to each canopy post.
To Adjust Canopy
Grasp the front of the
canopy and move it
forwards or backwards to
desired location.
1.
2.
11
12
C. Basic Use
C-1
Remove and Install the Carrier to Base
Failure to securely attach carrier to base can
result in serious injury or death.
C-2
Canopy Use and Installation
