29
C. Basic Use
Thread Harness Strap
If you have fully removed
the harness strap from
the child restraint,
(1)
with sewn end of the
harness strap loop
facing the buckle
,
thread
the harness strap down
through lower harness slot
on left side of shell.
(2)
Weave the harness
in and out of the shell,
between shell and pad, as
shown.
1.
30
C-11
Installing Harness System
Failure to reinstall the harness system
can result in serious injury or death.
Take both ends of the
harness strap and make
them even in length.
The sewn ends of the
harness strap loops
MUST face each other as
shown.
(3)
Thread left harness
strap through the
back
of the left buckle tongue.
Repeat for right harness
strap.
(4)
Thread the chest clip
from front to back as
shown.
(5)
Push harness ends
through upper harness
slots at same height.
DO NOT twist harness
straps.
3
4
5
1
2
4
2.
Attach Harness Straps
to Splitter Plate
From the back of the
child restraint, fit the
harness strap loops onto
the splitter plate.
The sewn end of the
harness strap loops
MUST face towards you.
DO NOT twist harness
straps or harness adjustment strap and make sure
the harness straps are COMPLETELY ON the splitter
plate.
3.
