27
C. Basic Use
28
C-10
Removing Pad for Cleaning
You must remove the harness system to remove the
pad from the shell. See section C-9.
Replace child restraint pad by reversing order:
Starting from top of the child restraint, slip pad on shell.
Pull buckle and harness adjustment strap through pad.
Slip pad over front of shell.
Attach all of the tabs on the sides of shell.
Rethread harness (see section C-11).
Cleaning Pad
Machine wash separately with cold water on a gentle
cycle. Do not use bleach. Tumble dry separately for
10-12 minutes on low heat. Remove immediately.
Spot clean the harness straps.
Do not use child restraint without the pad.
Release the Pad Tabs
To release the tab, pull
down on the pad and pull
the tab out of the carrier.
Depending on your model,
unhook pad from the tabs at
the top of the carrier
(A)
.
1.
Remove Pad from Top
and Bottom
2.
A
Pull Buckle Through Pad
Remove pad.
3.
