manualshive.com logo in svg

EDAN INSTRUMENTS VE-1010, User Manual, Page: 66 / 79

Share
Download
EDAN INSTRUMENTS VE-1010 User Manual Download Page 66

VE-1010 Veterinary PC ECG User Manual                            Cleaning and Maintenance 

- 60 - 

Chapter 11 Cleaning and Maintenance 

CAUTION 

Turn off the system power and drag the power cable out from the socket before cleaning 
or disinfection. 

11.1 Cleaning and Maintaining the Patient Cable and 

Reusable Electrodes 

WARNING 

Failure on the part of the responsible individual hospital or institution employing this 
equipment to implement a satisfactory maintenance schedule may cause undue 
equipment failures and possible health hazards.

 

♦

 

Clean the patient cable with a clean soft cloth. Do not use the detergent containing 
alcohol to clean the patient cable. 

♦

 

Integrity of the patient cable, including the main cable and lead wires, should be 
checked regularly. Make sure that it is conductible. 

♦

 

Do not drag or twist the patient cable with excessive stress while using it. Hold the 
connector plugs instead of the cable when connecting or disconnecting the patient 
cable. 

♦

 

Align the patient cable to avoid twisting, knotting or crooking at a closed angle while 
using it. 

♦

 

Store the lead wires in a big wheel. 

♦

 

Once damage or aging of the patient cable is found, replace it with a new one 
immediately. 

Remove the remainder gel from the electrodes with a clean soft cloth first. Take suction bulbs and 
metal cups of chest electrodes apart, and take clamps and metal parts of limb electrodes apart. 
Clean them in warm water and make sure that there is no remainder gel. Dry the electrodes with a 
clean dry cloth or air dry naturally. 

CAUTION 

1. The device and accessories are to be disposed of according to local regulations after 

their useful lives. Alternatively, they can be returned to the dealer or the manufacturer 
for recycling or proper disposal. 

2. The disposable electrodes can only be used for one time. 

Summary of Contents for VE-1010
















































































Reviews:

No comments