manualshive.com logo in svg

EDAN INSTRUMENTS VE-1010, User Manual, Page: 17 / 79

Share
Download
EDAN INSTRUMENTS VE-1010 User Manual Download Page 17

VE-1010 Veterinary PC ECG User Manual                            Assembling VE-1010 VET PC ECG System 

- 11 - 

Chapter 3 Assembling VE-1010 VET PC ECG 

System 

WARNING 

1.  Use a special grounded socket to get accurate voltage and current. 
2.  When using a notebook computer with a two-prong plug, please connect a grounded 

printer to avoid power interference. 

 

 

                               

 

                  Patient Cable for Resting ECG                                                        Sampling Box 

                         

 

USB Cable for Resting ECG 

For resting ECG, 
1.

 

Insert plug 1 of the patient cable into socket 2 of the sampling box. 

2.

 

Insert plug 4 of the USB cable into socket 3 of the sampling box. 

3.

 

Insert plug 5 of the USB cable into the USB socket of the PC. 

4.

 

Connect a printer to the PC. 

5.

 

Insert the LPT softdog into the parallel interface of the PC, or insert the USB softdog into 

the USB socket of the PC. 

6.

 

Make sure that the parts above are properly connected, and then connect the PC, and the 
printer to the power supply. 

2 

3 

4 

5 

1 

Summary of Contents for VE-1010
















































































Reviews:

No comments