manualshive.com logo in svg

EDAN INSTRUMENTS VE-1010, User Manual, Page: 19 / 79

Share
Download
EDAN INSTRUMENTS VE-1010 User Manual Download Page 19

VE-1010 Veterinary PC ECG User Manual                              Installing VE-1010 VET PC ECG Software 

- 13 - 

4.2 About Installation Interface 

Insert the installation CD into CD-ROM, and double-click on 

Setup.exe

 

  on the installation CD to open the following installation interface. 

 

Figure 4-1 Installation Interface 

Click on the 

Install

 button to install VET PC ECG. Click on the 

Next

 button continually during 

installation. 

After installing VET PC ECG, click on the 

Install

 button on the installation interface. Then the 

Environment Detection

 interface pops up. Check the installing status of all the components. If 

the 

Environment Detection

 interface shows that a certain component needs to be installed, 

please install it manually. 

Click on the 

Help

 button to see the installation guide.

 

For details on installing VE-1010 VET PC ECG software, please refer to 

VE-1010 Veterinary PC 

ECG Installation Guide.

 

Summary of Contents for VE-1010
















































































Reviews:

No comments