17
16
Power Switch
Is for supplying or interrupting the power of machine, circuit breaker installed,
when the overloading or overflow of electricity happens, automatically shuts off
the power when pressing the switch “I”, the power is on, otherwise pressing “O”,
the power is “off”.
Emergency Switch
Is for stoping rollers' rotation and system operation on emergency.
When this switch pressed, the system does not operate for the cancellation of
emergency switch, turn the red handle right for one-third.
Feed table safety lever
Is a safety device for preventing the product's malfunction and user's safety.
Safety lever moves left/right, when installing front panel, pull the lever at the right
direction, install the front panel.
After installing front panel, leave the lever, it comes back to the original status by
the spring’s power.
If the safety lever is not fixed at the front fixing hole, the rollers does not operate.
Pressure plate
Is for speading over at feeding papers.
When you install the pressure plate, first pull the lever(positioned at left/right) to
arrow, install the feed table.
After installing, if you lay down the lever, it can be back to the original position by
spring.
Film tension handle
This controls the tension of the film.
Clockwise to increase film tension, ante clockwise to take off.
SEPARATOR - Option
Is a device for separating film from paper at working
with MICRONEX. When installation of separator
(positioned at the end of right/left) can be made by
pulling forwards to arrow direction and then, by the
back trimmer guide it can be installed.
After installation, if you lay down the lever, it can be
back to he original position by spring.
Rewinder tension handle
Is for the tension control of rewinder.
On the way of using it, if the tension is loose or too strong, adjust it.
Tension increases when turning the handle right, otherwise turn left, it decreases.
Clutch Handle
Clutch handle's pressure increases when turning the handle clockwise, otherwise
it decreases.
Generally, the clutch pressure is first fixed when delivery and recommend to
use it.
Back trimmer
Is for separating the laminating results from the laminator.
After laminating, at the condition of trimmer lever is pressed, push the trimmer
right(left), the film can be cut.
Foot switch
Is for mounting.
When you press the foot switch, the roller rotates. If you take off the foot switch,
the roller stops.
When the roller rotates by foot switch, be cautious
because the safety function does not work.
If you does not watch out, you can suffer a
personal injury.
Be cautious to the blade of trimmer.
laminating
heavy@gauge
QU@mount
HQU@ψڒࣹI
mount
HψڒࣹI
Main roller pressure lever
Is for the control of heating roller's pressure. The rightful pressure
can be selected by the laminating results. When the lever is
directed upwards, upper / lower roller are seperated, it is easy to
insert / remove a film or a paper.
At the time of roller not pressed, laminating does not happen.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
