background image

When lamintor is not in use, you must turn off the power switch, disconnect the power plug from the 
socket. 

When moving the product, turn off the power switch, disconnect the power plug from the socket.

CAUTION

Please avoid installing near the following places :
*Gas stove, Ventilator or Air conditioner due the higher temperature or higher humidity.
*Dusty environment.

Do not place any materials on the top of the laminator as they could catch a fire.

Avoid touching the  laminator and the film just after laminating as you could get burned.

Ensure all hair, neckties, necklaces, are kept free of the feeding table to avoid injury.

2 people are needed to carry this equipment to avoid personal injury or damage to the machine.

Danger - laminating blades are sharp and can cause injury

Keep gears and chains free of all materials.

Do not touch the roller and heating plate with your hand as you could be burnt.

Warnung

Wenn Sie dieses Symbol ignorieren, Sie können verletzen und sterben.

Dieser Sicherheitshinweise meint das
Verboten.
Wenn Sie nicht vorsichtig umgehen, das 
Gerät kann die Zerstörungen sein, und Sie 
können sich verletzen.

Dieser Sicherheitshinweise meint die Achtung.
Wenn Sie nicht vorsichtig umgehen, nicht 
genug Sicherheit garantieren.
In dem Zirkus, Sie konnen die Achtung fur 
Zeihen sehen.

Dieses Sicherheits-Zeichen markiert einen wichtigen Sicherheitshinweis in diesem
Bedienungshandbuch und auch an dem Gerät.

Lesen und beachten Sie diese Hinweise und die entsprechenden Anweisungen sorgfällig.

Es gibt zwei wichitige Sicherheitshinweise und sie meinen unter Folgende.

Vorsicht

Wenn Sie dieses Symbol ignorieren, Sie können verletzen und das Gerät kann 
Zerstörungen sein.

5

4

EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500

Summary of Contents for EXCELAM-Q 1100RS
















Reviews: