13
12
Power supply should be used AC 220V/20A above.
Necessarily Grounding is needed for your safety.
Grounding
This product is easy to carry mainly due to the caster attached
At carrying product, push the “locker of a caster” toward “OFF” direction and the caster moves.
The product is too heavy, necessarily more than 2 persons should carry the product. On the condition of loading and
carrying the product, necessarily use the lift-truck.
After installing a product, push “locker of a caster” toward “ON” direction. The caster are fixed, it prevents from the
product’s movement.
The product is too heavy, therefore at the condition of carrying product,
necessarily more than 2persons carry. If you don't, it makes a product breakage
and personal injury
On carrying product, segregate the powerplug from the outlet, otherwise it makes an
electric shock
At the same place, carry and install the product in a short distance, use a caster.
At the caster, a locker is installed, on carrying product, you should unlock the locker
of a caster.
The caster's locking or unlocking is fixed when you push the “lock(ON)” just like the
right picture, the caster is locked and otherwise push “OFF” lever, the caster is
unlocked. After carrying the product, lock the caster.
Lock(ON)
Unlock(OFF)
Unlock(OFF)
Lock(ON)
Product installation should be installed on the hard and balanced floor. At the condition of unbalanced status, a laminating
quality can be down.
Grounding is necessary for your safety. If the grounding isn't good,
a static electricity happens excessively, it can be a main reason of a
malfunction on operating of a laminator. A malfunction and electric
leakage can make an electric shock.
Insert the powerplug inside firmly.
If you don't, it makes a fireflame by the overheating.
Upper Heating roller temperature
indication panel
Shows the setting temperature of Heating
roller and current temperature.
In the normal condition, setting temperature
diplays but if you press “Measure indication
button” of Function button, It shows the
current temperature. A setting temperature
change can be modified by pressing the top
button upwards or downwards.
This product has a self-detection system for
overheating. If a heater's temperature rises
too high, it displays “OH”, in this case you turn
off the power supply of machine, contact your
dealer.
Speed Display Window
It displays roller's rotation speed, Variation
speed is “1~9”. Roller's rotation speed is
modified by the “Speed setting button” being
adjusted up or down.
Job Mode Display Window
Can memorize the different working condition
from “1” to “9”, the displayed number means
that the working condition of included current
temp and speed memorized.
Working condition change can be adjusted by
“Job button”.
Working Mode Display Window
“READY” indicates that a heated roller's temperature has reached the laminating temperature.
When “READY” displays on the control panel, you can start laminating.
Heating Display Window
“WAIT” means that the roller's temperature is not right(temperaute is low) against setting
temperature. On the condition of “WAIT” displays, if you start laminating, a laminating can’t be
made. If “WAIT” on display window flickers, a roller's temperature is very high against a setting
temperature. When “WAIT” display flickers, at that time you start laminating, the laminating
result can have a crease, curving.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
