15
14
Temperature Setting Button
Is for the purpose of setting heated roller's temperature. The setting temperature range is
“0 ~130 ”. When you press the temperature setting button, the value on the display
increase “1 ” for the first time. If you press the button contineously, the temperature
increases 1 during 0.5 second, after two second, 10 increases quickly by one second.
MEAS Button
When you press the MEAS button. The machine beeps, the current temperature is flashed
in the “Temperature Window”. If you keep your fingers on the button, it displays a previous
set temperature.
Job mode button
Is for the purpose of setting JOB1~JOB9 level.
Memory Button
Is for memorizing of working condition.
JOB Mode Function
You can save 9 different working conditions from Job1 to Job 9.
Saving of Working condition
1) Select Number by using Job mode button.
(Selected Number displays on the Job mode display window)
2) You can set the temperature of the heated roller, speed with the temperature and speed
setting button.
3) If you press the “MEMORY”, setting value automatically is memorized.
Reference!!!
When you chang the temperature or speed, the changed number and current job number
flickers for 2senconds.
The flickering alarms that the setting value is correct and asks that saving the changed
contents to memorize at the job condition.
Speed Control Button
Is for the purpose of settting a roller rotation speed. Roller rotation speed can be increased /
decreased from 1 step to 9 step.
Change of roller’s rotating speed
1) When rollers rotate : by the change of speed, the roller rotates by the changed speed.
2) When rollers stop : At time of roller's stop, if you change the speed, only the number is
changed. Press the Run button if you want to rotate the roller.
RUN Button
Is for the purpose of roller rotation.
Stop Button
Is for the purpose of stopping a roller's rotation.
Reverse Button
This is for reverse rotation of the rollers. When pressed the “REVERSE” button will show a
speed flicker indication and the rollers will start to reverse. Remove fingers from the button to
stop reverse procedure.
Cooling button
Is for the purpose of starting a cooling motor.
Press once to start, once to stop.
STAND-BY
1) Setting by Users : For short time, if you does not operate the machine, it can be used.
At the normal condition. f you press the “STAND-BY” button, the setting temp. can be
changed to 80 automatically. (The operating condition stops)
2) Automatic setting by microprocessor : If you leave the machine for 3hours, micro-
processor installed in machine controls the roller temp. below 80 (If the setting temp is
below 80
it is controlled at the 0 ). At this time, stand-by display lamp is on, Job
display or Heater display window is cleared. And then one and half hour passed, Stand-
by Mode flickers and Power of heater is cut off."
At the above two condition, release of stanby mode is available by pressing “STAND-
BY” button again. If the saving mode is released, all conditions come back to the previous
status of stand-by mode.
Standby(Safety) Mode
In case of leaving the machine on for 3hours or longer, the temperature of roller will drop
below 80 and go to standby mode This is an automatic power-shut off function to prevent
an accident and save power.
Before Saving mode
Saving mode
Stand-by(safety) mode
Releasing power
save/stand-by mode
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
