Plug-and-Play 3D Sound Controller
Page 18
2.4.1.3. MPU-401 Interface
Selection
Settings
Select
OFF, ON
IO Port
300, 320, 330
IRQ
OFF, 5, 7, 2/9
2.4.1.4. Additional Options
Selection
Settings
Joystick
Enabled, Disabled
Modem
Enabled, Disabled
At the bottom of the menu are three selections.
The
Help
option displays a help file that shows you how to
navigate through the menus and save information.
The
Accept
option loads the settings as they appear on the
screen and exits the program.
The
Mixer
option displays the following screen:
This menu allows you to set the recording playback levels for
the audio mixer as well as select the input source for record-
ing.
The volume level all range from 0 to 99 and can be changed
by clicking on the up and down arrows next to the level or by
clicking on the gauge that shows the current level. You can
also turn on the mute to silence all audio levels.
The
Source
can be either
Line
,
CD
,
Mic
, or
Mix
. You can also
set the microphone volume to be 20dB higher than normal
(this is to compensate for some microphones that have low
output levels) and gain to a value between 0 and 99.
