Login Web UI:
After wireless connection is
sucessfully linked to this Travel
Router but you see this page when
you try to access internet , it means
internet connection has a problem.
(Blue LED of Travel Router is off).
You can select to login Router
firmware to setup it or select another
to close message window.
After your selection, click ‘Next’ to
continue.
Note:
Anytime you want to setup Travel
Router, type the default SSID of Travel
Router in address bar of web browser
like shown on the right.
Default SSID Example
http://6258GNL9672
(found it on the
sticker label, the last 4 digits is
different on each device)
When you are prompted to input
username and password, input
default ‘
admin
’ as username and
‘
1234
’ as password, and then click
‘OK’ to continue.
