Quick Installation:
Before you can use this Travel Router to access Internet,
please make sure your computer is set to
DHCP client (obtain IP automatically from DHCP server)
and follow the following steps to setup this
Travel Router device.
Insert the USB cable of Travel Router
into an available USB port on your
computer or USB power adapter.
or
Insert LAN cable into LAN port of
Travel Router, to connect Travel
Router to LAN connection (ISP, or
home / hotel / corporate network
with DHCP enabled).
Please wait 2 minutes for device
booting up, the blue LED is blinking.
After blue LED turn off, connecting
your computer to Travel Router
through wireless connection by
searching the available wireless
network. Searching for
‘
6258GNLxxxx
’ access point,
where
‘xxxx’ is the last 4 digit of Travel
Router’s MAC address, like
‘6258GNL9672’ in the example on
the right.
When ‘6258GNLxxxx’ access point is
found, click to select it and then click
‘Connect’ to establish connection.
TIP: The default SSID of this Travel Router can be found on the sticker labeled on the side of Travel
Router.
