Please input the wireless security
settings for your wireless client here
or you can use all default values
without change. Then click ‘Apply’
button.
(Refer to ‘Security Setting’ in ‘Travel
Router Mode’)
In the last step of Quick Setup, you
can recheck all settings and select to
add web address of this Travel Router
for future use, please select ‘Yes’ to
add bookmark (IE and Firefox only).
Click ‘Apply’ when everything’s ok, or
click ‘BACK’ to go back to previous
setup page.
If you select ‘Yes’ in last step, you can
define the name of bookmark here.
Click ‘Add’ to add bookmark or
‘Cancel’ to abort.
(Other than IE/Firefox, it will pop up a
message for asking to add bookmark
manually)
Please be patient while Travel Router
is applying new settings.
Congratulations! The Quick Setup is completely done, now you can start to enjoy this travel router.
If your WISP requires WAN setting, please login firmware and go to advanced setup page for more
settings.
Note:
If you want to reset device to factory default, please hold on
‘WPS’ button
for 10 seconds until
‘
Internet
’ blue LED blinking, you can release button then device will start to reset.
For instructions of advanced settings, please refer to user manual in supplied CD-ROM.
