P5SD-B
User’s Manual
4:
Reference Information – 4.32
HDD Off After
This shuts down IDE hard disks that support a power saving
mode after a specified time period. The settings range from 1 to
15 minutes and can be set manually when power management is
in User Define mode. HDD Off After does not affect SCSI hard
disks. The default setting is Disabled.
Doze Mode
This sets the period of system inactivity after which the sys-
tem goes into Doze mode, the most limited power saving state.
The settings range from 1 minute to 1 hour and can be set manu-
ally when power management is in User Define mode. The de-
fault setting is Disabled. When the system goes into power sav-
ing mode, power management will skip to the next mode in the
sequence if this is disabled.
Standby Mode
This sets the period of system inactivity after which the sys-
tem goes into Standby mode, the intermediate power saving state.
The settings range from 1 minute to 1 hour and can be set manu-
ally when power management is in User Define mode. The de-
fault setting is Disabled. When the system goes into power sav-
ing mode, power management will skip to the next mode in the
sequence if this is disabled.
Suspend Mode
This sets the period of system inactivity after which the sys-
tem goes into Suspend mode, the maximum power saving state.
The settings range from 1 minute to 1 hour and can be set manu-
ally when power management is in User Define mode. The de-
fault setting is Disabled. When the system goes into power sav-
ing mode, power management will skip to the next mode in the
sequence if this is disabled.
The system automatically resumes from any power saving
mode when there is system activity such as keyboard activity or
an IRQ wake-up event like mouse movement or a modem ring.