P5SD-B
User’s Manual
4:
Reference Information – 4.24
Virus Warning
This protects the primary hard disk’s boot sector and partition
table from infection. Any attempt to write to them will halt the
system and produce a warning message. If this happens, you can
either allow the system to continue or stop it and boot from a
virus-free bootable floppy disk. Use an anti-virus utility located
on the floppy disk to check the hard disk. The default setting is
Disabled.
CPU Internal Cache
This enables CPU’s Level 1 built-in cache. Leave it enabled to
maintain system performance. The default setting is Enabled.
External Cache
This is the Level 2 external cache. Leave this enabled to main-
tain system performance. The default setting is Enabled.
Quick Power On Self Test
This feature speeds up the Power On Self Test (POST) by skip-
ping some parts of the POST. If your system is functioning nor-
mally, you can enable this feature to speed the boot process. The
default setting is Enabled.
Boot Sequence
This determines the order in which the computer checks drives
for an operating system. This allows you to configure the system
to boot from a CD-ROM drive, a SCSI drive and other options as
well as the drive A: floppy disk drive and drive the C: hard disk.
Swap Floppy Drive
This switches the floppy drive assignments so that drive A is
treated as drive B: and drive B: as drive A: under DOS. The de-
fault setting is Disabled.