P5SD-B
User’s Manual
4:
Reference Information – 4.25
Boot Up System Speed
The default setting is High. Under normal operating condi-
tions there should be no reason to change it.
Memory Parity Check
The default setting is Enabled. If the system memory installed
on the board does not support parity checking you can set this to
Disabled.
Boot Up NumLock Status
This item allows you to select which mode the numeric key-
pad on an IBM-compatible extended keyboard is set to when the
computer boots up. The options are:
On
– Numeric keypad mode
(Default)
Off
– Cursor control mode
Security Option
This sets when password protection is active. The two op-
tions are:
System – Password required at boot up
Setup – Password controls access to Setup utility
You create a password using the Password Setting option in
the main menu. If no password is set, the system ignores this
item.