manualshive.com logo in svg

ECS P5SD-B, User Manual, Page: 77 / 88

Share
Download
ECS P5SD-B User Manual Download Page 77

P5SD-B

 

User’s Manual

4:

 Reference Information – 4.31

Video Off Option

This governs in what modes the video display gets turned off.

The options are:

Susp,Stby-> Off

(Off in Suspend & Standby)

Susp-> Off

(Off in Suspend)

All Modes Off

(Off in Doze, Suspend & Standby)

Always On

(No video shut off)

Video Off Method

This governs monitor power saving by controlling how power

management blanks the monitor screen. The V/H Sync+Blank
blanks the screen, turns off scanning and requires a monitor with
“green” features. If you don’t have this type of monitor, use the
Blank option. DPMS (Display Power Management System) al-
lows the BIOS to control the display card if the it has the DPMS
feature.

V/H SYNC+Blank

Blank

(Non-green monitor, less saving)

DPMS

(Display card must support DPMS) [Default]

Modem Use IRQ

If you have a modem installed in your system you can enter

which IRQ it is using so that APM can control it. The default
setting is 3.

Summary of Contents for P5SD-B

























































































Reviews:

No comments