ECRON COSMO 1252421, User Manual

Page: 61 / 66

DESCRIPTION
Maximum fan flow rate
Fan power input
Service value
Standby power
consumption
Off-mode power
consumption
Fan sound power level
Maximum air velocity
Measurement standard
for service value SYMBOL VALUE
IEC 60879:1986 (corr. 1992)
UNIT
ECODESIGN INFORMATION REQUIREMENTS
Commission Regulation (EU) No 206/2012
F 132.42 m
3
/min
P 56.7 W
SV 2.34 (m
3
/min)/W
P
SB
N/A W
P
OFF
0.0 W
L
WA
46.0 dB(A)
c 1.8 m/seg
61
EN
The remote control is provided with 2 batteries R6 (AA), 1.5 V each.
- Remove the cover from the battery compartment located
at the back of the remote control.
- Insert the batteries according to their polarity (following the
s and –) .
- Replace the battery compartment cover.
The remote control is used to switch the fan on and off
(Figure 1).
1. FAN SWITCH-ON To switch the fan on,
press button “0” and then release it. To switch
the fan off, press button “0” again and then
release it.
2. SPEED The fan speed can be adjusted to
the desired level: 1 - low speed, 2 - medium
speed or 3 - high speed. To do so, press the
corresponding buttons and then release
them.
3. LAMP SWITCH-ON To switch the lamp on,
press the button located at the top left and
then release it.
4. LAMP SWITCH-OFF To switch the lamp
off, press the button located at the top right
and then release it.
Precautions
- Be careful with the remote control: avoid bumps or falls.
- The batteries should not be exposed to excessive heat such
as sunlight, fire or similar.
- If the unit is not going to be used for a long period of time,
remove the batteries from their compartment.