ECRON COSMO 1252421, User Manual

Page: 51 / 66

51
EN
BEFORE ASSEMBLING
Check that the box contains all the components listed.
NOTE: When the motor is removed from the box, place it on
a soft cloth to avoid any damage to the decorated surface.
DO NOT MOUNT THE FAN ON A SUSPENDED CEILING,
MINERAL WOOL BOARDS OR PLASTERBOARD, ETC.
Choose a location for the fan where the blades are at a
minimum distance of 2.35m from the ground. Mount the
support plate on the ceiling, or the plate already in use. In
order to fasten the plate correctly, use two self-threading
screws, to fix the plate to the beam or joist. If the place you
have chosen does not have a suitable beam for fastening,
install a 5 x 10 cm base between the ceiling joists to support
the fan.
1.- Attach the plate with the two screws included with the fan.
2.- Attach the plate with the two screws included with the
fan.
2.- Hang the fan on the hook on the decorative cover,
through a hole in the light fixture.
3.- Make electrical connections.
(See connection instructions)
4.- Secure the light fixture in the middle to the decorative
cover with the four screws provided. Turn the light fixture in an
anti-clockwise direction if necessary, to ensure that it is
securely installed.
5.- Attach each blade to its holder using three screws per blade.
Then attach the holders to the fan using two screws per
holder.
6.- Attach the anchoring elements
LIST OF PARTS
No.
1
NAME
Mounting plate
QUANTITY
1 piece
2 Light fixture 1 piece
3 Motor 1 piece
4 Blades (5) 5 pieces
5 Blade holder 5 pieces