12
EADM
SPLIT-TYPE ROOM AIR CONDITIONER
TROUBLESHOOTING GUIDE
NOTE
Stop the air conditioner inmmediately if one of the following faults occur. Disconnect the power and contact the nearest
customer service center.
MALFUNCTION
CAUSE
WHAT SHOULD BE DONE?
OPERATION/RUN indicator or other indicators continue flashing and this flash can´t be fixed by disconnecting
the power, and then connect it in again.
Fuse blows frequently or circuit breaker trips frequently.
Other objects or water penetrate the air conditioner.
The remote controller won´t works abnormally.
If one of the following code appears on the display area:
E0, E1, E1, E2, E3..... or P0, P1, P2, P3... ( go to www.ecoxline.com)
Power cut.
Unit may have become unplugged.
Fuse may have blown.
Battery in remote controller may have been
exhausted.
The time you have set with timer is incorrect.
Inappropriate temperature setting.
Air filter is blocked.
Doors or windows are open.
Air filter or outlet of indoor or outdoor unit has been
blocked.
Compressor 3 or 4 minutes protection has been
activated.
Wait for power to be restored.
Check that plug is securely in wall receptacle.
Replace the fuse.
Replace the battery.
Wait or cancel timer setting.
Set temperature correctly. Fopr detailed method
please refer to "Using remote control" section.
Clean the air filter.
Close the doors or windows.
Clear obstructions away first, then restart the
unit.
Wait.
Trouble
Unit does not
start
Unit not cooling
or heating
(Cooling/Heating
models only
room very well
while air flowing
out from the air
conditioner
If the troble has not been corrected, please contact a local dealer or the nearest customer service center. Be sure to inform
them of the detailed malfunctions and unit model.
Do not attempt to repair the unit yourself.
Always consult an authorised service provider.
