8
EADM
SPLIT-TYPE ROOM AIR CONDITIONER
CAUTIONS
Do not operate the air conditioner for long period with the
air flow direction set downward in cooling or dehumidifying
mode. Otherwise, condensation may occur on the surface of the
horizontal louvers causing moisture to drop on to floor or on
furnishing.
When the air conditioning is started immediately after it was
stopped, the horizontal louver might not move for approximately
10 seconds.
Open angle of the horizontal louver should not be set too small,
as COOLING or HEATING performance may be impaired due to too
restricted air flow area.
Do not move the horizontal louver manually, otherwise the
horizontal louver will be out of sync. But if this happens, please
cease operating, unplug power for a few seconds, then restart the
air conditioner.
HOW THE AIR CONDITIONER WORKS
AUTO operation:
When you set the air conditioner in AUTO mode, it will
automatically select cooling, heating (cooling/heating models
only), or fan only operation depending on what temperature
you have selected and the room temperature.
The air conditioner will control room temperature automatically
round the temperature point set by you.
If the AUTO mode is uncomfortable, you can select desired
conditions manually.
SLEEP operation
When you push SLEEP button on remote controller during
cooling, heating (cooling & heating modes only) or AUTO
operation, the air conditioner will automatically increase
(cooling) or decrease (heating) 1º C / 2º F per hour for the first
2 hours, then hold steady for the nest 5 hours, after that it will
switch off. This mode saves you energy and brings you comfort
at night.
DRYING operation
The temperature is regulated while dehumidifying by repeating
turning on and off of the cooling operation or fan only. The fan
speed is LOW.
To achieve optimal performance, please note the following:
Adjust the air flow direction correctly so that it is not directed
on people.
Adjust the temperature to achieve the highest comfort level. Do
not adjust the unit to excessive temperature levels.
Close doors and windows on COOL or HEAT modes, or
performance may be reduced.
Use TIMER ON button on the remote controller to select a time
you want to start you air conditioner.
Do not put any object near air inlet or air outlet, as the efficiency
of the air conditioner may be reduced and the air conditioner
may stop running.
Clean the air filter periodically, otherwise cooling or heating
performance may be reduced.
Do not operate unit with horizontal louver in closed position.
Cooling
Heating
Set
Temper
atur
e
Set
Temper
atur
e
7 hours timer off
7 hours timer off
1 hour
1 hour
1º C/2º F
1º C/2º F
1º C/2º F
1º C/2º F
1 hour
1 hour
SLEEP OPERATION
OPTIMAL OPERATION
HOW THE AIR CONDITIONER WORKS
SLEEP OPERATION
