15
gently at low speed, and use the DTOF sensor to avoid obstacles of about the
same height as the robot.
6.
Q: Why does DEEBOT keep failing when trying to create the initial map?
A: (1) It is not recommended to attach the mopping pad plates when creating a
map.
(2) The first time DEEBOT maps, it needs to start from the docking station.
Mapping will fail if you disturb it, for example, by manually forcing it to stop,
manually forcing the unit back to charge, or moving it back directly to the docking
station.
(3) It is recommended to pay attention to the cleaning status of DEEBOT during
cleaning, and to help remove obstacles during cleaning to avoid mapping failure.
7.
Q: Why are new maps slanted?
A: (1) There are a lot of household items around the home. We recommend that
you remove the items when creating maps.
(2) It is recommended to start from the docking station (charging dock) when
creating maps.
(3) Try to delete the map and mapping again after moving the docking station
(charging dock).
8.
Q: After quick mapping, I did a whole-house cleaning. Why did the areas
change in the map?
A: Since the map information may vary slightly between quick mapping and a
whole-house cleaning, it's recommend to edit the map manually in this situation.
